Table of Contents
Advertisement
Figure 108. Top view of the node
NOTE:
The leftmost DIMM slot is 23, and the slots decrease sequentially to slot 0 on the far right.
2. Depress the white or black retaining tabs downward to free the DIMM from its slot.
3. Remove the faulted DIMM.
Figure 109. Removing the DIMM
Install the dual inline memory module
Steps
1. Touching only the outside edges of the DIMM, align the DIMM with the connector.
2. Press the DIMM vertically down into the socket using pressure at each end while keeping the leading edge of the DIMM
parallel to the connector until it fully seats to the bottom of the socket. When the DIMM engages the contacts in the socket,
you will feel resistance, and slightly more force is required to push the module down. During this stage, keep in mind the
following precautions:
● Do not insert the DIMM at an angle.
● Do not rock the DIMM.
● Do not insert the DIMM by pushing on one end.
Base enclosure service procedures
97
Advertisement
Table of Contents
