Table of Contents
Advertisement
Results
The LUN ID of a volume changes automatically when a volume is migrated from one PowerStore appliance to another appliance
in the same cluster.
Follow these guidelines when migrating a boot volume:
● Power off the connected host before migrating the boot volume. Then, change the LUN ID for the boot volume after the
migration is performed and power on the host.
● The recommend Host LUN ID for a boot LUN is 0.
● After migrating a boot from SAN volume, the LUN ID can be changed back to 0.
NOTE:
For instructions on changing the LUN, see the PowerStore Host Configuration Guide.
Remove appliances from the cluster
201
Advertisement
Table of Contents
