Table of Contents
Advertisement
5.7 Lamp Replacement
5.7 Lamp Replacement
Electric shock due to contact with inside of instrument!
Before detaching the light source cover for lamp
replacement, be sure to turn off the power switch and
unplug the power cord from the wall receptacle.
Prohibition of releasing the safety mechanism!
In this instrument, the safety mechanism functions to turn
off power supply automatically when detaching the lamp
cover. This safety mechanism must not be released
intentionally. Otherwise, there is a risk of electric shock due
to wrong operation.
Burns due to hot temperature!
The lamp and lamp cover are hot during and immediately
after use of the lamp. There is a risk of burns due to contact
with the hot lamp or its cover when replacing the lamp.
Before start of lamp replacement, turn off the power switch
and wait for half an hour or longer. After the lamp has
cooled down, it should be replaced with a new one.
When detaching the light source cover, the safety
mechanism functions to put out the lamp automatically. The
safety mechanism must not be released intentionally.
5 - 14
WARNING
WARNING
CAUTION
Advertisement
Table of Contents
