Hitachi Relion 670 Series Applications Manual page 387

1MRK506375-UEN Rev. N
Function block with defined functions for supervision indications in monitor direction, I103Superv.
This block includes the FUNCTION TYPE parameter, and the INFORMATION NUMBER parameter
is defined for each output signal.
• Earth fault indications in monitor direction
Function block with defined functions for earth fault indications in monitor direction, I103EF. This
block includes the FUNCTION TYPE parameter, and the INFORMATION NUMBER parameter is
defined for each output signal.
• Fault indications in monitor direction
Function block with defined functions for fault indications in monitor direction, I103FLTPROT. This
block includes the FUNCTION TYPE parameter, and the INFORMATION NUMBER parameter is
defined for each input signal.
This block is suitable for distance protection, line differential, transformer differential, over-current
and earth-fault protection functions.
• Autorecloser indications in monitor direction
Function block with defined functions for autorecloser indications in monitor direction, I103AR. This
block includes the FUNCTION TYPE parameter, and the INFORMATION NUMBER parameter is
defined for each output signal.
Measurands
The measurands can be included as type 3.1, 3.2, 3.3, 3.4 and type 9 according to the standard.
• Measurands in public range
Function block that reports all valid measuring types depending on connected signals, I103Meas.
• Measurands in private range
Function blocks with user defined input measurands in monitor direction, I103MeasUsr. These
function blocks include the FUNCTION TYPE parameter for each block in the private range, and the
INFORMATION NUMBER parameter for each block.
Fault location
The fault location is expressed in reactive ohms. In relation to the line length in reactive ohms, it
gives the distance to the fault in percent. The data is available and reported when the fault locator
function is included in the IED.
Disturbance recordings
• The transfer functionality is based on the Disturbance recorder function. The analog and binary
signals recorded will be reported to the master by polling. The eight last disturbances that are
recorded are available for transfer to the master. A file that has been transferred and
acknowledged by the master cannot be transferred again.
• The binary signals that are included in the disturbance recorder are those that are connected to
the disturbance function blocks B1RBDR to B22RBDR. These function blocks include the
function type and the information number for each signal. For more information on the
description of the Disturbance report in the Technical reference manual. The analog channels,
that are reported, are those connected to the disturbance function blocks A1RADR to A4RADR.
The eight first ones belong to the public range and the remaining ones to the private range.
18.6.2 Settings
Railway application RER670
Application manual
© 2017 - 2023 Hitachi Energy. All rights reserved
Section 18
Station communication
M17109-99 v2
M17109-108 v1
M17109-111 v9
M17109-116 v1
381