Table of Contents
Advertisement
[ZEBRA2 DETECT]
Sets the detection level of zebra pattern 2.
The items that can be set are as follows.
f [0%]...[109%]
(Factory setting: [100%])
[ZEBRA2]
Enables/disables zebra pattern 2 and selects [SPOT].
The items that can be set are as follows.
f [ON], [SPOT], [OFF]
(Factory setting: [OFF])
[WFM MODE]
Sets the display of the waveform monitor. Displaying of the waveform and the vector can be switched.
[WAVE]
[VECTOR]
[WAVE/VECTOR]
(Factory setting: [WAVE])
[WFM TRANSPARENCE]
Sets the transmittance of the waveform monitor.
The items that can be set are as follows.
f [0%], [25%], [50%]
(Factory setting: [25%])
[SPOT METER UNIT]
Sets the display unit for the spot meter.
This is fixed to [%] when set to anything other than the [SYSTEM SETTINGS] menu → [COLOR SETTINGS] → [MAIN] → [V-Log].
The items that can be set are as follows.
f [STOP], [%]
(Factory setting: [STOP])
[SPOT METER SIZE]
Sets the size of area to detect with the spot meter display function.
The items that can be set are as follows.
f [S], [M], [L]
(Factory setting: [M])
[LCD LEVEL GAUGE]
[LEVEL GAUGE]
Displays/hides the level gauge.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[LEVEL GAUGE RESET]
Sets the horizontal and vertical reference value set by [LEVEL GAUGE SET] in the USER button to the factory setting.
The items that can be selected are as follows.
f [YES], [NO]
[COLOR BARS]
[COLOR BARS TYPE]
Sets the color bar to be used.
[SMPTE]
[FULL]
(Factory setting: [SMPTE])
[TEST TONE]
Sets if the audio test signal (tone signal of rating level 1 kHz) is output or not when the color bars are displayed.
The reference level varies depending on the setting in the [AUDIO SETTINGS] menu → [AUDIO CH SETTINGS] → [HEAD ROOM].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
Chapter 4 Operation — Menu setting contents
Displays the waveform.
Displays the vector.
Displays the waveform and the vector.
It will switch in the order of waveform, vector, and no display every time the USER button with [WFM] assigned is pressed.
Uses the color bars in SMPTE standard.
Uses the full color bars.
– 101 –
Advertisement
Table of Contents
