Table of Contents
Advertisement
[COLOR SETTINGS]
[MAIN]
Sets the colors of videos (entire camera system) recorded in the main recorder.
[V-Log]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
(Factory setting: [V-Log])
NOTE
@
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this will be fixed to [V-Log].
[SDI OUT]
Sets the output image from the <SDI OUT> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log]
[V-709]
f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
(Factory setting: [V-Log])
NOTE
@
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this will be fixed to [V-Log].
[HDMI OUT]
Sets the output image from the <HDMI> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log]
[V-709]
f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
(Factory setting: [V-Log])
[LCD OUT]
Sets the output image from the <LCD> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log]
[V-709]
f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
(Factory setting: [V-Log])
[USER SWITCHES]
The function to assign the <USER 1> to <USER 9> buttons and multidial can be set.
For details, refer to "Assigning function to the USER buttons".
Following functions can be assigned to [USER1] to [USER9].
f [INHIBIT], [AWB], [ONE PUSH AF], [ONE PUSH A.IRIS], [ATW LOCK], [E.I.S.], [D.ZOOM], [IR SHOOTING], [REC SW], [PRE REC], [REC CHECK],
[DEL LAST CLIP], [SLOT SEL], [EXPAND], [OPEN IRIS F.A.], [PEAK./SQUARES F.A.], [WFM], [SPOT METER], [ZEBRA], [LEVEL GAUGE], [LEVEL
GAUGE SET], [SDI COLOR], [HDMI COLOR], [LCD COLOR], [LCD CLEAN VIEW], [LCD MARKER], [COLOR BARS], [POWER LCD]
[USER1]
[USER2]
[USER3]
Chapter 4 Operation — Menu setting contents
Sets to the gamma curve that can achieve gradation and wide latitude (exposure range). A grading process after recording is
required.
Sets to setting to perform detailed image quality adjustment with the camera.
When [SCENE1] to [SCENE5] is selected, the menu setting for the same scene number is enabled in the [SCENE FILE
SETTINGS] menu.
Outputs with the same color as the video recorded in the main recorder.
Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
Outputs with the same color as the video recorded in the main recorder.
Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
Outputs with the same color as the video recorded in the main recorder.
Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
Sets the function to assign to the <USER 1> button.
(Factory setting: [ONE PUSH AF])
Sets the function to assign to the <USER 2> button.
Assigned function is enabled when the VIEW screen is displayed.
(Factory setting: [PEAK./SQUARES F.A.])
Sets the function to assign to the <USER 3> button.
Assigned function is enabled when the VIEW screen is displayed.
(Factory setting: [SPOT METER])
– 75 –
Advertisement
Table of Contents
