Table of Contents
Advertisement
[SW]
Enables/disables the shutter function.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[MODE]
Sets the displaying method of the shutter speed.
[sec]
[deg]
(Factory setting: [deg])
[VALUE deg]
Selects the aperture angle of the shutter when the display unit in [MODE] of [SHUTTER] is set to [deg].
Following values are registered as the factory settings.
f [HALF SHUTTER], [11.5d], [22.5d], [45.0d], [90.0d], [120.0d], [144.0d], [172.8d], [180.0d], [270.0d], [357.0d]
(Factory setting: [HALF SHUTTER])
[ADD deg]
Newly registers the aperture angle of the shutter to select when the display unit in [MODE] of [SHUTTER] is set to [deg]. The newly registered value can
be selected in [VALUE deg].
Maximum of 12 values can be registered. It cannot be registered when there are 12 registered already.
[EDIT deg]
The currently selected setting value can be edited. It will be saved after updating the setting value.
[DELETE deg]
Deletes the currently selected setting value.
It cannot be deleted if there is only one registered setting value.
The items that can be selected are as follows.
f [YES], [NO]
[VALUE sec]
Selects the time when the display unit in [MODE] of [SHUTTER] is set to [sec].
Following values are registered as the factory settings.
f [HALF SHUTTER], [1/60.0], [1/100.0], [1/120.0], [1/250], [1/500], [1/1000], [1/2000]
(Factory setting: [HALF SHUTTER])
[ADD sec]
Newly registers the value of time to select when the display unit in [MODE] of [SHUTTER] is set to [sec]. The newly registered value can be selected in
[VALUE sec].
Maximum of 12 values can be registered. It cannot be registered when there are 12 registered already.
[EDIT sec]
The currently selected setting value can be edited. It will be saved after updating the setting value.
[DELETE sec]
Deletes the currently selected setting value.
It cannot be deleted if there is only one registered setting value.
The items that can be selected are as follows.
f [YES], [NO]
[EI]
[MODE]
Switches the EXPOSURE INDEX control unit.
The items that can be set are as follows.
f [ISO], [dB]
(Factory setting: [ISO])
@
NOTE
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this will be fixed to [ISO].
Chapter 4 Operation — Menu setting contents
Displays in time.
Displays in the shutter aperture angle.
– 80 –
Advertisement
Table of Contents
