Table of Contents
Advertisement
[OUTPUT SETTINGS] menu
Sets the display content or output format of the video.
[SDI OUT]
[OUTPUT SW]
Enables/disables the output from the <SDI OUT> terminal.
[ON]
[OFF]
(Factory setting: [ON])
NOTE
@
t It will be fixed to [ON] when the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF].
[SIGNAL SEL]
Sets the output from the <SDI OUT> terminal.
[SDI]
[LCD(1080p)]
[LCD(1080i)]
(Factory setting: [SDI])
NOTE
@
t It will be fixed to [SDI] when the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF].
[OUT FORMAT]
Selects the signal to be output from the <SDI OUT> terminal. The items that can be selected differ depending on the setting in the [SYSTEM
SETTINGS] menu → [SYSTEM MODE] → [FREQUENCY]/[MAIN PIXEL].
[4096x2160p]
[3840x2160p]
[1920x1080p]
[1920x1080i]
[1920x1080PsF]
[1280x720p]
(Factory setting: [1920x1080PsF])
NOTE
@
t For the combination that can be set, refer to "Format that can be output from the <SDI OUT> terminal".
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this cannot be set.
[3G-SDI OUT]
Sets the format of the 3G SDI signal output from the <SDI OUT> terminal. Can be set when the 3G SDI signal is output.
[LEVEL-A]
[LEVEL-B]
(Factory setting: [LEVEL-B])
@
NOTE
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this cannot be set.
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT> terminal (such as recorder) is to be controlled or not.
[ON]
[OFF]
(Factory setting: [OFF])
@
NOTE
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this cannot be set.
t When the [REC SETTINGS] menu → [REC FUNCTION] → [REC MODE] is set to [INTERVAL], this cannot be set.
[INDICATOR DISP]
Displays/hides the item set in [SDI/HDMI INDICATOR] for the output from the <SDI OUT> terminal.
[ON]
[OFF]
(Factory setting: [ON])
Chapter 4 Operation — Menu setting contents
Outputs the video.
Does not output the video.
Outputs the signal set in [OUT FORMAT] of [SDI OUT].
Outputs the video displayed on the LCD monitor in 1920×1080p.
Outputs the video displayed on the LCD monitor in 1920×1080i.
Outputs in 4096×2160p.
Outputs in 3840×2160p.
Outputs in 1920×1080p.
Outputs in 1920×1080i.
Outputs in 1920×1080PsF.
Outputs in 1280×720p.
Selects the LEVEL-A method.
Selects the LEVEL-B DL method.
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
Displays the shutter speed, remaining battery level, etc. Content of display follows the setting in [SDI/HDMI INDICATOR].
Hides all.
– 92 –
Advertisement
Table of Contents
