Table of Contents
Advertisement
[HDMI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <HDMI> terminal (such as recorder) is to be controlled or not. This can
be set when [HDMI TC OUT] in [HDMI OUT] is enabled.
[ON]
[OFF]
(Factory setting: [OFF])
NOTE
@
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this cannot be set.
t When the [REC SETTINGS] menu → [REC FUNCTION] → [REC MODE] is set to [INTERVAL], this cannot be set.
[INDICATOR DISP]
Displays/hides the item set in [SDI/HDMI INDICATOR] for the output from the <HDMI> terminal.
[ON]
[OFF]
(Factory setting: [ON])
@
NOTE
t This is not displayed in the output from the <HDMI> terminal when the menu is displayed in the LCD monitor.
[MARKER DISP]
Set if the marker set in [SDI/HDMI MARKER] is to be displayed or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[MENU DISP]
Sets if the menu is displayed or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
NOTE
@
t Even if [MENU DISP] is set to [OFF], the menu is displayed in the output from the <HDMI> terminal during the thumbnail screen.
[SDI/HDMI INDICATOR]
Selects the indicator to display in the output image from the <SDI OUT> terminal or the output image from the <HDMI> terminal.
To display, set the [OUTPUT SETTINGS] menu → [SDI OUT] → [INDICATOR DISP] and the [OUTPUT SETTINGS] menu → [HDMI OUT] →
[INDICATOR DISP] to [ON].
For content of display, refer to "Screen status display".
[CLIP NAME]
Displays/hides file name of the clip to record. Displays maximum of 8 characters from beginning.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[PIXEL/FREQ]
Displays/hides the number of recorded pixels and system frequency of the main recorder.
The display contents differ depending on the setting in the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [MAIN PIXEL] and [SENSOR MODE].
f When [SENSOR MODE] is set to [S35 MIX 2.8K]: [2048 MIX] and [1920 MIX] are additionally displayed.
f When [SENSOR MODE] is set to [4/3 CROP&MIX 2.2K]: [2048 CROP] and [1920 CROP] are additionally displayed.
f When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], the RAW output resolution and the
system frequency set in [SDI RAW] are displayed.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[MAIN COLOR]
Displays/hides the color setting of the video to be recorded in the main recorder.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[REC FORMAT]
Displays/hides recording codec of the main recorder.
When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], [SDI RAW] is displayed.
Chapter 4 Operation — Menu setting contents
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
Displays the shutter speed, remaining battery level, etc. Content of display follows the setting in [SDI/HDMI INDICATOR].
Hides all.
– 94 –
Advertisement
Table of Contents
