Table of Contents
Advertisement
11 Time code
Displays the time code, user bits, and duration in accordance with the [REC SETTINGS] menu → [TC] → [TC/UB/Dur.] setting.
f [TC **:**:**:**]: Displays the time code. (Displayed black and white inverted when slave locked to the externally input time code)
f [UB ** ** ** **]: Displays the user bits.
f [Dur **:**:**:**]: Displays the duration.
12 Power supply status
: Indicates the remaining battery level while powered with the battery. (The battery status display will change as
→
while the remaining battery level gets lower. It will flash in red when the remaining battery level is zero)
: Displays when powered with the AC adaptor.
13 Audio level meter
Displays the volume.
Displays the reference level position set in the [AUDIO SETTINGS] menu → [AUDIO CH SETTINGS] → [HEAD ROOM] → [18dB]/[20dB] is blacked
out. (Eighth from left when set to [20dB], ninth from left when set to [18dB])
: Displays when audio cannot be recorded. (Such as when the variable frame rate recording function is enabled, and the frame rate is set
A.REC
f
different from the system frequency.)
14 Frame rate
Displays the frame rate.
Displays two places of decimals only when the frame rate is the same as the system frequency setting.
This is not displayed when the system frequency is 60i/50i.
15 Shutter speed
Displays the shutter speed.
Display of [sec] and [deg] can be switched with the [CAMERA SETTINGS] menu → [SHUTTER] → [MODE]. Displays in time (minutes) display when
set to [sec], and in aperture angle when set to [deg].
Does not display when the shutter is disabled.
16 EXPOSURE INDEX
Displays the sensitivity of the video. Display of [ISO] and [dB] can be switched with the [CAMERA SETTINGS] menu → [EI] → [MODE].
17 Spot meter
Displays the brightness of the center in either [STOP] or [%] unit.
When [V-Log] is selected, [STOP] and [%] can be switched with the [OUTPUT SETTINGS] menu → [LCD EI ASSIST] → [SPOT METER UNIT].
When anything other than [V-Log] is selected, the display is fixed as [%].
18 Color temperature
Displays the selected color temperature.
f [A*****K+**.*]: Displays the value of the color temperature and the setting value of GMg. [A] is displayed in case of preset list acquired by
the auto white balance.
f [ATW]: Displays when the auto tracking white balance is operating.
f [ATW LOCK]: Displays when the auto tracking white balance is locked.
19 Iris
Displays the F value. ([A] is displayed when auto iris is operating)
This is not displayed in the following cases.
f When the lens is not connected
f When the data cannot be acquired
20 Zoom
Displays the zoom distance in millimeter unit.
This is not displayed in the following cases.
f When the lens is not connected
f When the data cannot be acquired
21 ND filter
Displays the selected ND filter.
f [ND:1.8]: Reduces the amount of light entering the MOS sensor to 1/64.
f [ND:1.2]: Reduces the amount of light entering the MOS sensor to 1/16.
f [ND:0.6]: Reduces the amount of light entering the MOS sensor to 1/4.
f [ND:CLR]: The ND filter is not used.
22 Electronic image stabilization function/digital zoom
Displays when the electronic image stabilization function is set or the digital zoom is enabled.
f [EIS]: Displays when the electronic image stabilization function is enabled.
f [D1.4x]: Displays when the 1.4x digital zoom is enabled.
23 Special recording function
Displays the status of special recording function.
f [INTRVL]: The interval recording is stopped.
f [I-REC]: The interval recording is in progress. (Displayed in red)
24 Message display area
Displays the message such as the camera status or the warning.
25 Level gauge
Tilt in horizontal direction or vertical direction can be checked.
Displays only on the LCD monitor.
26 Wireless LAN connection status
Displays the connection status of the wireless LAN.
Chapter 7 Output and Screen Display — Screen status display
– 157 –
→
→
→
Advertisement
Table of Contents
