Table of Contents
Advertisement
Chapter 4 Operation — Menu setting contents
[FRAME MARKER]
Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.
The items that can be set are as follows.
f [1.33:1], [1.44:1], [1.56:1], [1.78:1], [1.85:1], [2.00:1], [2.201:1], [2.35:1], [2.39:1], [OFF]
(Factory setting: [OFF])
[FRAME COLOR]
Sets the color of the frame marker.
The items that can be set are as follows.
f [WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
(Factory setting: [WHITE])
[PLAYBACK MARKER]
Displays/hides the marker against the playback video output from the <SDI OUT> terminal and the <HDMI> terminal.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[LCD INDICATOR]
Selects the indicator displayed in the LCD monitor. For details of the displayed contents, refer to "Screen status display".
[CLIP NAME]
Displays/hides file name of the clip to record. Displays maximum of 8 characters from beginning.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[PIXEL/FREQ]
Displays/hides the number of recorded pixels and system frequency of the main recorder.
The display contents differ depending on the setting in the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [MAIN PIXEL] and [SENSOR MODE].
f When [SENSOR MODE] is set to [S35 MIX 2.8K]: [2048 MIX] and [1920 MIX] are additionally displayed.
f When [SENSOR MODE] is set to [4/3 CROP&MIX 2.2K]: [2048 CROP] and [1920 CROP] are additionally displayed.
f When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], the RAW output resolution and the
system frequency set in [SDI RAW] are displayed.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[MAIN COLOR]
Displays/hides the color setting of the video to be recorded in the main recorder.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[REC FORMAT]
Displays/hides recording codec of the main recorder.
When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], [SDI RAW] is displayed.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[SLOT1/2 STATUS]
Displays/hides the status of the card slot and remaining recordable capacity.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[2 SLOTS FUNC.]
Displays/hides the setting in the [REC SETTINGS] menu → [2 SLOTS FUNC.].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[TC]
Displays/hides the time code, user bits, and duration counter. The display contents follow the setting in the [REC SETTINGS] menu → [TC] → [TC/UB/
Dur.]. Displays the duration counter of TCR/UBR/playback clip during playback.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
– 97 –
Advertisement
Table of Contents
