Table of Contents
Advertisement
2
Select the file to overwrite from the list of setup files.
The file name entry screen and the keyboard are displayed. Leave it as is when overwriting.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
Saving the setup file as a new file in the SD card
Saves the current setting value of the camera into the SD card in the card slot 1 as a new file by specifying the file name.
1
Select the [FILE] menu → [SETUP FILE] → [SAVE AS].
The file name entry screen and the keyboard are displayed.
2
Enter the text to set with the keyboard.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
f An error message may be displayed. For details regarding the error message, refer to "Cases indicated by error messages".
Reading the setup file
Reads the setup file saved in the SD card in the card slot 1.
1
Select the [FILE] menu → [SETUP FILE] → [LOAD].
The list of setup files stored in the specified folder in the SD card in the card slot 1 is displayed.
2
Select the file name for the file to read.
3
Select [SET].
Loading of the file is started. The camera is restarted after reading.
f An error message may be displayed. For details regarding the error message, refer to "Cases indicated by error messages".
f The file saved by a camera with different firmware version may not be able to read.
Chapter 4 Operation — Handling setting data
– 115 –
Advertisement
Table of Contents
