Fujitsu AIRSTAGE UTY-ASGX Manual page 33

4-3 Environment setting
Various settings related to the operating environment are performed.
Display tab:
Room temperature tab: Sets the room temperature display method.
4-3-1 Display setting
Sets the display method of the Time/Temperature/Pressure/Capacity to be displayed by the
Web application.
Temperature selection item
Sets the temperature display units.
When you want to display the temperature in centigrade, select "Centigrade °C".
When you want to display the temperature in fahrenheit, select "Fahrenheit °F".
Pressure selection item
Select the pressure display units from "MPa" or "psi".
Indoor unit capacity selection item
Select the units of capacity of the displayed indoor unit from "BTU/h" or "kW".
Outdoor unit capacity selection item
Select the units of capacity of the displayed outdoor unit from "HP" , "kW" or "ton" .
However, when the unit different from outdoor unit destination is specified, " - " is dis-
played and the value may not be displayed.
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Sets the Time/Temperature/Pressure/Capacity display method.
31