Fujitsu AIRSTAGE UTY-ASGX Manual page 43

Note For the indoor units already allocated a No., No. cannot be updated even by
executing this operation. When No. must be reallocated, execute it after clearing
the No.( )
Selecting units
When units are recognized and numbered, double click on the unit. The name registra-
tion dialog box will appear.
Naming units
Enter the name for the unit and click "OK".
Stop registration
Click "Stop" when finished with the registration.
When the operation
Note
If this operation was not performed, the indoor unit will not operate properly
thereafter. (Indoor unit fan will not operate.)
End registration
Click "Close" to end manual setting registration.
Clear button
Clear the No. (
by this operation, the indoor unit can be operated at
Note Instead of registering names for each start operation, you may operate all the
units and name all the units at once after stopping registration.
4-5-5 Model∙Name∙Writer
An arbitrary model name can be written to the target unit. (V-II/J-II/J-IIS/VR-II/V-III series)
Adaptor selection
Selects the transmission adaptor which connects the target unit.
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
was executed, always end registration by this operation.
) of an arbitrarily selected indoor unit. When indoor unit was cleared
.
(1