Fujitsu AIRSTAGE UTY-ASGX Manual page 56

R.C.G. Displays the R.C. Group No.
R.B.G.No. Displays the R.B. unit group No.
Name Displays the unit name.
Model Displays the unit model (Indoor/Outdoor).
Displays the model name of the unit.
If the model name is with "[ ]" brackets, the name was written after shipment.
Model Name
If the model name is with "( )" brackets, the name was read from the Name master data-
base file.
Model Name
Displays the model name of the attached unit of the unit.
(Other)
Type Displays the unit type.
Displays the indoor unit and outdoor unit capacity.
However, S and V series outdoor units are not displayed.
Capacity Indoor unit capacity is displayed in [BTU/h] or [kW] units.
Outdoor unit capacity is displayed in [HP] or [ton] , [kW] units.
Displays {capacity value} when it is set at step 8 of (-3-1 Display setting.
Operation Displays the operating status.
Displays the operating mode.
Mode
When "(Auto)" is displayed, operation is linked to the "Auto" mode of the master indoor
unit of the refrigerant circuit.
Set Temp. Displays the setting temperature. (*1)
Room Temp. Displays the room temperature. (*1)
H.E.1. In Displays the heat exchanger inlet temperature. (*1)
H.E.1. Mid Displays the heat exchanger middle temperature. (*1)
H.E.1. Out Displays the heat exchanger outlet temperature. (*1)
Displays expansion valve.
EEV
Units display is [Pulse].
When a unit is currently generating an error, displays [Error].
Error The troubleshooting screen (refer to "(-1( Others screen (Time Guard Information)") is
displayed by clicking.
Special Operation Displays special operation with icon. Refer "List of icon for special operation" below.
Fan Displays the fan status. (*2)
V.T. Louver Displays vertical louver position.
H.Z. Louver Displays horizontal louver position.
Displays the R.C. Prohibition setting.
R.C. Prohibition
* Display whether the "All prohibition" is enabled or disabled.
Displays the newest receiving time of a transmission packet received by the Service Tool.
(12-hour display or 2(-hour display) (*3)
Time • For summer time, (S) is displayed.
Whether or not network communication is performed normally is made the judgment stan-
dard.
((
icon,if displayed, signifies that mode mismatch has occurred due to illegal operation.
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.