Schematic Specification Method - Fujitsu AIRSTAGE UTY-ASGX Manual

5-5-2 Schematic∙specification∙method
The refrigerant circuit, outdoor unit, and indoor unit are specified at the control area and the
schematic is displayed. The graph X-axis/display date are also changed and the screen is
refreshed.
Specifies the refrigerant circuit.
Selects the outdoor unit.
Selects the indoor units. (Up to 3 indoor units can be selected.)
When the
Changes the X-axis time. Select from
Displays the data of the specified date/time. (*3)
Select the date from
Change the time by the following method.
&
&
&
Demands are sent to the currently displayed refrigerant circuit in a
concentrated manner by checking
units at a shorter interval, check mark the box.
Automatically refresh the screen at a 30 seconds interval by checking
.
Note *1 The latest date/time are displayed.Only when preset.
*2 The X-scale of the graph is changed by selection. (Default 1h)
*3 The dates at which there is data are displayed in a list and can be selected.
When the date/time was changed and the schematic was displayed, the
check mark is removed from "Auto refresh".
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
button is clicked, the schematic display is refreshed. (*1)
.
Shift the time 1 graduation.
Shift the time 1 axis.
Shift up to the first or last data acquisition time of the specified date.
By inputting time, data for the nearest time will be displayed.
. (*2)
. When you want to monitor
71