Fujitsu AIRSTAGE UTY-ASGX Manual page 34

Table of Contents

OK button

When the

closed.

Cancel button

When the

closes.

Apply button

When the

Show also the capacity setting of the unit.

Simultaneously shows the capacity value set by PCB of each indoor unit and outdoor

unit at the capacity display field on each screen. When displayed, it is displayed by

{capacity value} to distinguish it from the capacity specified by each model.

However, when the unit different from outdoor unit destination is specified, " - " is dis-

played and the value may not be displayed.

Note

• This set value is used for switching the capacity of air conditioning con-

trol. Since the set value may not correspond to the capacity specified by

each model, use it only as a guide. (Slight deviation due to destination

differences and setting mistakes at PCB replacement, etc.)

•

"kW" of outdoor unit is not displayed because this function is not sup-

ported.

•

S and V series indoor unit and outdoor unit are not displayed.

Note

After changing the display settings, the changes will take effect only from the

Web application newly started from the Menu screen.

In order for the changes to take effect, re-display the Web application from the

Menu Screen (Refer to "(-2 Menu").

button is clicked, the set contents are saved and the screen is

button is clicked, environment setting stops and the screen

button is clicked, the set contents are saved.

Table of Contents

Troubleshooting