Table of Contents
Advertisement
5-9-2
Error∙history∙display∙method
Display unit model selection field
Selects the unit model.
For indoor unit/outdoor unit, select "In/Outdoor Unit" and for centralized
remote con-
troller/transmission adaptor, select "Peripheral Device".
Refrigerant circuit selection field
Specifies the range of the refrigerant circuit address to be displayed. (*1)
Date selection field
Selects the range of dates to be displayed. (*2)
Specifies the corresponding date from the calendar displayed by pressing the Start or
End button to select the date.
OK button
Refreshes the display data according to the selected conditions by clicking the
button. (*3)
Display item change button
The
button displays the next error. (Errors are displayed in groups of (, such as
when Error1~Error( were displayed, Error6~Error10 are displayed.)
The
button returns to the previous error.
Clear button
Clears the error history data of the selected refrigerant circuit by clicking the
but-
ton.
Request button
Acquires the current error state of an arbitrarily specified indoor unit or outdoor unit.
However, when an error is not generated, nothing is displayed after execution.
9(
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
