Fujitsu AIRSTAGE UTY-ASGX Manual page 75

5-6-1 Name∙and∙function∙of∙each∙area
Control area
„ „
Sets display contents specification.
Ref.No.
OK
&
&
Date/Time
Option
IDA mode
Auto refresh
Diagram
Commissioning
Mark List
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Displays the refrigerant circuit address
Also, any refrigerant circuit address may be specified and be switched to.
Fix the Ref. No. and the date / time of the data to be displayed.
Shift up to the first or last data acquisition time of the specified date.
Shift the time 1 graduation.
Date/time for the data currently displayed will be shown. By specifying spe-
cific date and time, any data may be displayed.
Set whether Display item (column) should be displayed or hidden.
Items to be set in the option screen is as follows. When display items are set,
they will be displayed on the right side.
Checked ... display, Unchecked ... hidden
Sets to the Intensive Data acquisition mode which demands data from the
Service Tool to each unit.
Checked: Demand output only for the displayed refrigerant circuit.
Unchecked: Demand output for the entire system.
Specifies automatic refreshing of the displayed data.
Checked: Automatically refresh the screen at a 30 seconds interval.
Unchecked: Do not automatically refresh the screen.
This will switch to the Diagram screen.
(Refer to "(-( Detail screen (Diagram)")
Starts the commissioning tool. (Refer to "(-7 Commissioning tool")
Displays the list of abbreviations.
73