Siemens SINAMICS S120 Equipment Manual page 527

Table 9-16 Connectable cable cross-sections: Power supply cable/motor cable, part 2
Component
Motor Module
3 A to 30 A
2 x 3 A to 2 x 18 A
Motor Module
45 A to 60 A
Motor Module 85 A
Motor Module
132 A to 200 A
Smart Line Module
5 kW to 10 kW
Acitve Line Module 16 kW
Smart Line Module 16 kW
Acitve Line Module 36 kW
Smart Line Module 36 kW
Acitve Line Module 55 kW
Active Line Module
80 kW to 120 kW
1) for ring cable lug to DIN 46234
Terminal area for flexible cable with wire end ferrule
Terminal area for flexible cable with ring cable lug M6
Terminal area for flexible cable with ring cable lug M8
IP2xB to EN 60529 ensured; note: the shock-hazard protection installed as standard must be used or adjusted as appropriate.
Table 9-17 Connectable cable cross-sections: Power supply cable/connection for braking resistor, part 3
Component
Basic Line Module 20 kW
line connection
Basic Line Module 20 kW
Connection for braking
resistor
Basic Line Module 40 kW
line connection
Basic Line Module 40 kW
Connection for braking
resistor
Basic Line Module 100 kW
line connection
Booksize power units
Manual, (GH2), 06/2008, 6SL3097-2AC00-0BP6
Terminal type
Motor connector 30 A 3+2 pin
Threaded bolt M6/6 Nm
1)
Threaded bolt M8/13 Nm
Threaded bolt M8/13 Nm
Screw terminal
Screw terminal
Threaded bolt M6/6 Nm
Threaded bolt M8/13 Nm
Threaded bolt M8/13 Nm
Terminal type 1.5
Screw terminal x
Screw terminal x
Screw terminal
Screw terminal
Threaded bolt
M8/13 Nm
Cabinet Design and EMC Booksize
Connection cross-section [mm
25 35 50
X X X
X X X
X X X
X X X
X X X
X X X
Connection cross-section [mm
2.5 4
x x
x x
x
x x
9.6 Connection systems
]
2
70 95 120
X X
X X
X X
X X
]
2
6 10 16
x x x
x x
x x x
x x x
X
X
X
X
527