Siemens SINAMICS S120 Equipment Manual page 8

Foreword
EC Declarations of Conformity
The EC Declaration of Conformity for the EMC Directive can be found/obtained:
● on the Internet:
● with the responsible branch office of the A&D MC Business Division of Siemens AG.
The EC Declaration of Conformity for the Low Voltage Directive can be found/obtained
● on the Internet:
Note
When operated in dry areas, SINAMICS S devices conform to the Low Voltage Directive
73/23/EEC or 2006/95/EEC.
Note
SINAMICS S devices comply with EMC Directive 89/336/EEC or 2004/108/EC in the
configuration specified in the associated EC Declaration of Conformity and when the EMC
installation guideline is implemented, Order No. 6FC 5297-⃞AD30-0AP⃞.
Electrical, magnetic and electromagnetic fields (EMF) that occur during operation can pose
a danger to persons who are present in the direct vicinity of the product - especially
persons with pacemakers, implants, or similar devices.
The relevant directives and standards must be observed by the machine/plant operators
and persons present in the vicinity of the product. These are, for example, EMF Directive
2004/40/EEC and standards EN 12198-1 and -3 pertinent to the European Economic Area
(EEA), as well as accident prevention code BGV 11 and the associated rule BGR 11
"Electromagnetic fields" of the German employer's liability accident insurance assocation.
These state that a hazard analysis must drawn up for every workplace, from which
measures for reducing dangers and their impact on persons are derived and applied, and
exposure and danger zones are defined and observed.
The relevant safety notes in each chapter must be observed.
8
http://support.automation.siemens.com
under the Product/Order No. 15257461
http://support.automation.siemens.com
under the Product/Order No. 22383669
DANGER
Booksize power units
Manual, (GH2), 06/2008, 6SL3097-2AC00-0BP6