HP 3336A Operating Manual page 112

Model 3336A/B/C
Performance Tests
Table 4-1.
Specification:
Model 3336A
150 ohm output
600 ohm output
Model 3336B
124 ohm output
135 ohm output
600 ohm output
Required Equipment:
AC Voltmeter
Resistors (3 ea. required)
R= 62 ohm (3336B only) (3 required)
R=67.5 ohm (3336B only) (3 required)
R=75 ohm (3336A only) (3 required)
R=300 ohm (3336A/3336B) (6 required)
.
> 36 dB, 10 kHz to 2.09 MHz
> 38 dB, 300 Hz to 50 kHz
> 30 dB, 10 kHz to 10.9 MHz
> 36 dB, 10 kHz to 2.09 MHz
> 38 dB, 300 Hz to 50 kHz
-hp- Model 400E or EL
-hp- Part No. 0698-6800
-hp- Part No. 0698-7364 (2 in parallel)
-hp- Part No. 0698-7363
-hp- Part No. 0698-6319
nected to ground.
@ b. Set the 3336 frequency to 10 kHz.
124 ohm
135 ohm
150 ohm
600 ohm
+ 1.76 dBm
+1.76 dBm
+1.76 dBm
+ 7.00 dBm
d. Record the voltmeter reading, using the dB scale (Vref).
e. Connect the equipment as shown in Figure 4-8B.
OUTPUT OUTPUT LEVEL RESISTOR
TEST FREQUENCIES
1240 1.76 dBm 620 10 kHz, 100 kHz, 1 MHz,
10 MHz
1350 1.76 dBm 67.50 10 kHz, 100 kHz, 2.09 MHz
1500 1.76 dBm 750 10 kHz, 100 kHz, 2.09 MHz
6002 7.00 dBm 3000 300 Hz, 10 kHz, 50 kHz
&
g. Subtract Vpa] (Step d) from Vref (Step f) and enter the results on the Performance Test
Record for each test frequency.
4-27