HP 3336A Operating Manual page 12

Model 3336A/B/C General Information
@
1-13. DESCRIPTION.
1-15. AVAILABLE MODELS.
1-16. The Model 3336 is manufactured as one of three models identified by the letters A, B
or C following the model number. The difference between models is the configuration of the
front panel outputs. The outputs on each model are:
1-17. ACCESSORIES SUPPLIED.
MODEL OUTPUTS ACCEPTS CONNECTOR TYPE
e oo
3336A 75 ohm unbal | 75 ohm BNC
150 ohm bal Siemens type 3 prong 9REL STP-6 AC
600 ohm bal Siemens type 3 prong 9REL STP-6 AC
3336A with 75 ohm unbal | Siemens type 1.6/5mm coaxial
Option 001 150 ohm bal Siemens type 3 prong 9REL STP-6 AC
600 ohm bal Siemens type 3 prong 9REL STP-6 AC
3336B 75 ohm unbal | WECO type 439A or 440A
124 ohm bal WECO type 443A
135 ohm bal WECO type 241A
600 ohm bal WECO type 310
3336B with 75 ohm unbal | WECO type 358A
Option 001 | 124 ohm bal WECO type 372A
135 ohm bal WECO type 241A
600 ohm bal WECO type 310
3336C 50 ohm unbal | 50 ohm BNC
75 ohm unbal | 75 ohm BNC
1-18. A special BNC to BNC connector is supplied with the High Stability Frequency
Reference (Option 004) to connect the High Stability Frequency Reference to the instru-
ment. This connector is -hp- Part No. 1250-1499.
\
1-7