Configuring The Snmp Agent - NEC Express5800/320Ma Software Installation And Configuration Manual

Configuring the SNMP Agent

1. Right-click My Computer and click Manage.
2. Expand Services and Applications and click Services.
3. In the details pane, right-click SNMP Service and click Properties. Then click the
Traps tab to control which computers will receive alarm information (traps).
4. To add another destination, on the Traps tab, click Add (see
SNMP Service Configuration dialog box, type the host name, IP address, or IPX
address of an additional destination to which you want alarm information (traps)
sent. Click Add. Typically, you add the computers and their backup computers that
run the enterprise management console.
5. Repeat step
6. Click Apply.
4 for any additional destinations.
Extending the Microsoft SNMP Agent
Figure
Configuring Software
3-1). In the
3-3