Table of Contents
Advertisement
4-14 Configuring Your Server
PCI Configuration submenu
When [PCI Configuration] is selected in the Advanced menu and then the Enter key is pressed, the
screen below is displayed.
For details about the options, see the following table.
Option
LAN Controller
LAN1 Option ROM
Scan
LAN2 Option ROM
Scan
PCI Slot 0A Option
ROM
PCI Slot 1B
Option ROM
PCI Slot 1C
Option ROM
IMPORTANT: For a RAID controller, LAN card (network boot), or
Fibre Channel controller, if no hard disk drive on which an OS is
installed is connected, set the option ROM for that slot to [Disabled].
Parameters
Disabled
Specify whether to enable or disable the onboard LAN
[Enabled]
Controller.
Disabled
Specify the boot method for LAN1, which is onboard.
[PXE Boot]
iSCSI Boot
Disabled
Specify the boot method for LAN2, which is onboard.
[PXE Boot]
iSCSI Boot
Disabled
Specify whether to enable or disable an option ROM for
[Enabled]
a RAID controller installed in a slot dedicated to RAID
controllers.
Disabled
Specify whether to enable or disable an option ROM for
[Enabled]
a PCI card connected to the full-height riser card.
Disabled
Specify whether to enable or disable an option ROM for
[Enabled]
a PCI card connected to the low-profile riser card.
Description
[
]: Factory-set
Advertisement
Table of Contents
Troubleshooting
