Installing Scsi Controller Driver (N8103-75/107); Graphics Accelerator Driver; Installing Sas Controller Driver (N8103-104A); Installing Fibre Channel Controller Driver (N8190-127/131/153/154) - NEC Express5800/R120b-1 User Manual

Graphics Accelerator Driver

If you use standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD-ROM attached to your system.
Standard graphics accelerator drivers will be installed automatically.
NOTE:
The graphics accelerator driver is supported only on a server running a
full installation. Use VGA on a server running a Server Core
installation.
Observe the following procedure when you want to reinstall the driver individually.
1.
Insert the NEC EXPRESSBUILDER DVD-ROM into the optical disk drive.
If the autorun menu is displayed, close menu screen.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "setup.exe" in the following directory.
\017\win\winnt\ws2008x64\video
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER DVD-ROM from the optical disk drive, restart the
system.

Installing SCSI Controller Driver (N8103-75/107)

If you use the SCSI Controller N8103-75/107, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.

Installing SAS Controller Driver (N8103-104A)

If you use the SAS Controller N8103-104A, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.

Installing Fibre Channel Controller Driver (N8190-127/131/153/154)

If you use the Fibre Channel Controller N8190-127/131/153/154, you do not need to install the
driver manually. It is automatically installed by Windows Plug-and-Play.
<Windows Server 2008>
Installing Windows Server 2008 R2 D-21