Table of Contents
Advertisement
14.
Reinstall the fan duct.
NOTES:
Check to see that the fan duct is firmly installed with no clearance between the
duct and chassis.
Check to see that no cable is caught between the duct and the motherboard.
15.
Install the covers you removed previously.
16.
Power on the server, start the SETUP utility, and set "Processor Retest" of "Processor
Settings" on the Main menu to "Enable".
17.
Verify that POST displays no error messages.
If POST displays an error message, take a note on the message and see the POST error
messages listed in Chapter 8.
Upgrading Your Server 9-45
Advertisement
Table of Contents
Troubleshooting
