NEC Express5800/R120b-1 User Manual page 150

Removing Password
1.
Move the jumper switch to the password removal position in the same way as in steps 1 to
5 of "Clearing CMOS Memory".
2.
Reassemble the server, and press the POWER switch to turn on the server.
3.
Press F2 during POST to run the BIOS Setup utility, set the password again, and select
[Save Changes and Exit].
4.
Turn off the server, and move the jumper strap to the password protect position.
5.
Reassemble the server.
Configuring Your Server 4-63