Ac Power Leds - NEC Express5800/R120b-1 User Manual

AC POWER LEDs

There is an AC POWER LED for the power supply unit on the rear.
The LED turns green and flashes when the power supply unit receives AC power from the power
cord, which is connected to the AC inlet. (Flashing amber indicates no AC power is received in any
one of two power supplies in the redundant configuration.)
The LED turns green when the server power switch is turned on. If the LED does not go on when
the server power switch is turned on or if it turns amber, the power supply unit is probably faulty. In
this case, contact your service representative to replace the power supply unit.
NOTE:
is mounted, the system can continue operating on the other power
supply unit (redundancy function). The failing power supply unit can be
replaced in hot swap mode (with the power on) without the system
being stopped.
AC POWER LED
Power supply slot
If one power supply unit fails while an optional power supply
AC inlet
AC POWER LED
Power supply slot
(option) (standard)
Troubleshooting 8-9
AC inlet