Installing On The Mirrored Volume; Mounting Mo Device - NEC Express5800/R120b-1 User Manual

5-4 Installing the Operating System with Express Setup
Supported Mass Storage Controllers
The NEC EXPRESSBUILDER DVD-ROM attached to your system supports the following mass
storage controllers for installation.
Controllers supporting installation of OS with Express Setup
– N8103-129 RAID controller (256MB, RAID 0/1)*
– N8103-130 RAID Controller (256 MB, RAID0/1/5/6)*
– Onboard RAID Controller (LSI Embedded MegaRAID™)
Other controllers
– N8103-75 SCSI Controller*
– N8103-104A SAS Controller*
– N8103-107 SCSI Controller*
– N8190-127 Fibre Channel Controller*
– N8190-131 Fibre Channel Controller (2ch)*
– N8190-153 Fibre Channel Controller (1ch)*
– N8190-154 Fibre Channel Controller (2ch)*
* Option
About the Hardware Components
When you install the Windows Server 2008 R2, Express Setup requires several preparations if this
computer uses the following hardware components.

Installing on the Mirrored Volume

When re-installing the OS to a hard disk drive which has been upgraded to Dynamic Disk, only the
simple dynamic volume is available for installation.
If you want to install the OS on a volume that is mirrored using Disk Management, invalidate the
mirroring and reset to the basic disk before the installation, and validate the mirroring again after the
installation.
You can create, invalidate, or delete the mirror volume by using Disk Management in Computer
Management.

Mounting MO Device

Do not mount an MO device on this computer during the Windows installation.