NEC Express5800/R120b-1 User Manual page 549

9.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Windows 32-bit)] and press Enter.
IMPORTANT:
the N8103-75/107 SCSI controller, press S.
The screen of Step 5 is displayed.
Go to Step 10.
10.
<If the SAS Controller N8103-104A is connected>
Press S.
IMPORTANT:
Insert the Windows Server 2003 OEM-Disk for
EXPRESSBUILDER into the floppy disk drive. If the floppy disk
drive has already contained Windows Server 2003 OEM-Disk for
EXPRESSBUILDER, you do not need to insert the Windows Server
2003 OEM-Disk for EXPRESSBUILDER.
If you have created the OEM-Disk into the Flash FDD, connect the
Flash FDD before you start the system.
The screen of Step 6 is displayed. Press Enter, and go to Step 11.
<If the SAS Controller N8103-104A is not connected>
Press Enter, and go to Step 12.
11.
A list of mass storage devices is displayed.
Select the [LSI Fusion-MPT SAS Driver (Server 2003 32-bit)] and press Enter.
The screen of Step 5 is displayed.
Press Enter, and go to Step 12.
If the following message is displayed when you use
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra320 SCSI Cards (Windows
32-bit)"
Unless the device manufacturer prefers that
you use the driver on the floppy disk, you
should use the driver in Windows.
Installing Windows Server 2003 G-11