NEC Express5800/R320a-E4 User Manual page 188

5-28 Installing and Using Utilities
Supplement
Note the followings when using NEC ESMPRO Agent.
Application log registered when system starting
About the event of "Source: Perflib"
When system is starting, Perflib log may be registered to the application log.
The detailed information about an event log is described on Microsoft Product Support
Services. Please check the contents.
– [INFO] Events for Performance Monitor Extensions
http://support.microsoft.com/default.aspx?scid=kb;en-us;226494
– Application Log Events Generated When You Start Performance Counter Query
http://support.microsoft.com/default.aspx?scid=kb;en-us;296187
– Event ID 2003 Warning Message Logged When Loading Performance Counters
http://support.microsoft.com/default.aspx?scid=kb;en-us;267831
Visit the Microsoft Help and Support on regular basis where you can find other
information than the above at http://support.microsoft.com/default.aspx?LN=en-us.
LAN Monitoring Report
The LAN monitoring function defines the line status depending on the number of transmission
packets and the number of packet errors within a certain period. Thus, the LAN monitoring function
may report a line fault or high line load only in a temporary high line impedance state. If a normal
state recovery is reported immediately, temporal high line impedance may have occurred thus there
is not any problem.
Community Authority
Depending on your OS type or its version, settings for community, SNMP service's security
function, are not made, or default settings of authority are different.
To enable the remote shutdown and threshold change functions via NEC ESMPRO Manager, make
settings of community and set its authority to "READ CREATE" or "READ WRITE."
Change of SNMP Community
If the security setting of the SNMP Service of a system, where the NEC ESMPRO Agent is installed,
is changed from the default "public" to a community name, change the community settings of the
NEC ESMPRO Agent, too.
Double-click the [NEC ESMPRO Agent] icon in [Control Panel].
1.
Select a desired community name from the [SNMP Community] list box in [SNMP
2.