NEC Express5800/R320a-E4 User Manual page 386

7-20 Troubleshooting
Command prompt cannot be displayed in full screen:
In NEC Express5800/ft series, you cannot switch command prompt to full screen
mode. Also, you cannot execute applications that use command prompt full screen
mode. When you attempt to switch to full screen mode, the message below may
appear. Click [OK] and close the window.
<Example message>
A CPU/IO module cannot be integrated:
When a componet fails and is reintegrated, the following message may be recorded
to the system event log and the process is stopped. Such event indicates that the
component's MTBF is below the threshold and it is judged that repair is necessary.
Thus the reintegration process cannot be completed. Generally replacement of the
component will be required, so contact your sales representative. If reintegraating the
component without repair is required for some reason, consult your sales agent. It is
possible to perform reintegration forcefully.
Source:
ID:
Description:
When you integrate a PCI module when exchanging, starting and diagnosing the PCI
module, follwing events may be recorded on [System] in [Event Viewer], and the
duplex process may fail:
Source:
ID:
Description:
Source:
ID:
Description:
"XX" refers to the PCI module ID. If it is PCI module 1, it is shown as "10"; if it is
PCI module 2, it is shown as "11." As to "xxxx," the value differs depending on
circumstances when errors occur.
If the above events are recorded, follow the below prcedure to integrade the PCI
module.
(1)
(2) Select [Clear] under [MTBF clear].
(3) Select [Start] to start the PCI module.
srabid
16395
x is now STATE BROKEN / REASON_BELLOW_MTBF ("x" is a
device number.)
srabid
16474
Diagnostics failure of XX: 'IO GbEnet OUI Verification 1, D821'
(Ftn=xxxx Info=xxxx,xxxx).
srabid
16395
XX is now STATE BROKEN/REASON_DIAGNOSTICS_FAILED
Select the PCI module that failed to integrate on the ft Server Utility.