NEC Express5800/R320a-E4 User Manual page 196

5-36 Installing and Using Utilities
Use [Local Security Policy Setting] to add an "Administrators" group to the "Impersonate a
1.
client after authentication" item.
Restart the system.
2.
Perform installation (uninstallation).
3.
Restore the local security policy setting to the original setting.
4.
Restart the system.
5.
I/O device information on the Multi monitor system
If you use the multi monitor system with the additional graphic accelerator board, the information
of the only monitor 1 is displayed on the I/O device view of the DataViewer.
Refresh rate of display adaptor
If you selected [use default setting of hardware], the value of the refresh rate is '1Hz' under
[I/O Device] - [Display adapter name] on DataViewer.
- The setting of the screen refresh rate can be confirmed by [Properties] on the screen.
([Setting] tab - [Advanced] - [Monitor] tab - [Screen refresh rate])
- It is set to the use of a default setting of hardware by the refresh rate of the screen when
the monitor name is displayed as 'Generic PNP Monitor'.
Deleted Reporting Method
From the NEC ESMPRO Agent Ver. 4.3, the following reporting methods will not be supported.
• Pager
• ALIVE
About event log monitoring
Events displayed on Alert Manager can be monitored.
Events that are not displayed on Alert Manager cannot be monitored.
Example)
You cannot monitor the following new events since Windows Vista (Windows Eventing 6.0).
- Events that a channel is not defined in metadata.