NEC Express5800/R320a-E4 User Manual page 89

Commands for RDR Virtual Disk
Verify RDR Virtual Disk
Whether the synchronization by RDR is performed normally can be checked.
Start RDR Utility and right-click [RDR Virtual Disk x] in the left pane and click [Verify
1.
RDR Virtual Disk].
In the [Verify RDR Virtual Disk] dialog box, click [OK].
2.
The progress of verification can be viewed using RDR Utility.
[Status] of RDR Virtual Disk x
TIPS:
The verification process is automatically performed every 1 week.
The time required for verification depends on the disk size and load.
For 73GB disk, it takes about 90 minutes.
Stop Verifying RDR Virtual Disk
Verification of RDR virtual disk in progress can be stopped.
Start RDR Utility and right-click [RDR Virtual Disk x] in the left pane and click [Stop Verify
1.
RDR Virtual Disk].
In the [Stop Verify RDR Virtual Disk] dialog box, click [OK].
2.
Set Resync Priority
Priority of synchronization by RDR can be specified. By changing the priority, I/O load during
synchronization can be reduced.
Start RDR Utility, right-click [RDR Virtual Disk x] in the left pane and click [Set Resync
1.
Priority].
When a dialog box appears, select Low, Normal or High (a default is Normal) and click
2.
[OK].
In the [Set Resync Priority] dialog box, click [OK].
3.
Windows Setup and Operation 3-19
Verifying
Verify x percent
(x=0, 4, 8, ..., 96)
Verification completed
None