Tone; Beep Tone; Power-On Tone; Control Tone - Kenwood TKR-750-850 Function Reference

9 TONE

You can configure a beep tone to sound when turning
TKR-750/850/751/851 ON and pressing a PF key. You
can also configure a Information Tone to beep when the
transmission ends using the PTT switch and the power
source of TKR-750/850/751/851 is switched to the
backup battery. You can configure each tone by KPG-
91D. You are also able to adjust the volume level of
Power-on Tone, the Control Tone, and Warning Alert
Tone.
! Configuration of KPG-91D
" Adjusting the volume of tones (Refer to FPRG
6.4.2 "Optional Features 2" tab.)
9.1

Beep Tone

You can configure the following Beep Tones by KPG-91D.
Table 9-1 List of Beep Tones
Type Description of functions
This tone notifies the user that TKR-750/
Power On Tone
850/751/851 is turned ON.
This tone sounds when TKR-750/850/751/
851 is operated.
• Key Press Tone (A)

Control Tone

• Key Press Tone (B)
• Key Input Error Tone
• Roll Over Tone
This tone warns a user.
• Warning Alert Tone

Warning Tone

• TOT Pre-alert Tone
• Busy Tone
9.1.1

Power-on Tone

This tone sounds when turning the TKR-750/850/751/851
ON.
! Configuration of KPG-91D
" Configuring the Power-on Tone (Refer to FPRG
6.4.2 "Optional Features 2" tab.)
Version: 1.01 USA
9.1.2
This tone sounds when TKR-750/850/751/851 is
operated following operation.
Function
Key Press Tone
(A)
Key Press Tone
(B)
Key Input Error
Tone
Roll Over Tone
! Configuration of KPG-91D
" Configuring Control Tones (Refer to FPRG 6.4.2
"Optional Features 2" tab.)
9.1.3 Warning Tone
This tone is used to warn a user.
Function
Warning Alert
Tone
TOT Pre-alert
Tone
Busy Tone
! Configuration of KPG-91D
" Configuring the Warning Alert Tone (Refer to
FPRG 6.4.2 "Optional Features 2" tab.)
Function Reference (FUNC)
Control Tone
Table 9-2 List of Control Tones
Description
This tone sounds when the assigned
function activates by pressing a PF key.
This tone sounds when the assigned
function is disabled by pressing a PF key.
This tone sounds when the operation of the
PF key is denied.
This tone sounds when selecting the lowest
channel by a PF key.
Table 9-3 List of Warning Tones
Description
This tone sounds when a PTT switch is kept
to press even after the Time Out Timer of
the Local Mic PTT expires or while the
Rekey Time is activated.
This tone sounds when Time Out Timer is
going to be expired shortly.
This tone sounds when a transmission is
disabled while the Busy Channel Lockout is
enabled.
22