Table of Contents
Advertisement
16 SCAN
Starting Priority Scan
Scanning Priority Channel
Scanning other Channel
Stopping at Normal Channel
! Configuration of KPG-91D
" Configuring the Look Back Time A (Refer to FPRG
6.6.3 Look Back Time A.)
Note: TKR-750/850/751/851 pauses on the Priority Channel
when there is a signal to receive and a signalling
matches while scanning the Priority Channel.
16.4 Look Back Time B
The Look Back Time B is a period from the time when
TKR-750/850/751/851 pauses scanning on a normal
channel to the time when it resumes a Priority Scan when
the received QT/DQT code does not match with a QT/
DQT Decode code configured on the Priority Channel
even if there is a signal to receive in the Priority Channel
during the Priority Scan.
Starting Priority Scan
Scanning Priority Channel
Scanning other Channel
Stopping at Normal Channel
! Configuration of KPG-91D
" Configuring the Look Back Time B (Refer to FPRG
6.6.4 Look Back Time B.)
Note: TKR-750/850/751/851 pauses on the Priority Channel
when a carrier and a signalling matches while scanning
the Priority Channel.
35
No Receiving
Signals Present
Look Back Time A
Interval
Detecting Signals to Receive
Signalling does not match
Look Back Time B Interval
Function Reference (FUNC)
16.5 Revert Channel
This is a revert channel configuration to transmit when
PTT is pressed while scanning
Select from following 6 type for the revert channel.
Table 16-1 Revert Channel Configuration
Function
You can transmit on a channel that was used
until TKR-750/850 paused scanning in order
to receive a signal while scanning.
When it pauses scanning after changing the
channel by pressing a PF [Channel Up/
Last Called
Down] key, it uses the newly selected
channel to transmit.
When TKR-750/850 pauses scanning to
receive a signal, it uses a currently selected
channel to transmit.
You can transmit on a channel that was
previously used to transmit while scanning.
When TKR-750/850 pauses scanning after
changing the channel by pressing a PF
Last Used
[Channel Up/Down] key, it uses the newly
selected channel to transmit.
When TKR-750/850 pauses scanning to
receive a signal, it uses the currently
selected channel to transmit.
You can transmit on a channel that was
selected to change the channel while
scanning.
When TKR-750/850 pauses scanning after
changing the channel by pressing a PF
Selected
[Channel Up/Down] key, it uses the newly
selected channel to transmit.
You can transmit on a channel that was
selected to change the channel while TKR-
750/850 pauses scanning in order to receive
a signal.
You can transmit on a channel that was
selected to change the channel while
scanning.
When TKR-750/850 pauses scanning after
Selected + Talk
changing the channel by pressing a PF
Back
[Channel Up/Down] key, it uses the newly
selected channel to transmit.
When TKR-750/850 pauses scanning to
receive a signal, it uses the currently
selected channel to transmit.
You can use a Priority Channel for
transmitting.
When TKR-750/850 pauses scanning after
changing a channel by pressing a PF
Priority
[Channel Up/Down] key, the Priority Channel
is used to transmit.
When TKR-750/850 pauses scanning to
receive a signal, the priority channel is used
to transmit.
Description
Version: 1.01 USA
Advertisement
Table of Contents
