Table of Contents
Advertisement
26 BACKUP
The TKR-750/850/751/851 has a function to restore the
operation state when TKR-750/850/751/851 is turned ON
or reset.
The state of Scan, Channel, Scrambler, Multi-table, and
Low Power functions are back upped.
•
When the Scan is enabled and the configuration is
restored, TKR-750/850/751/851 starts scanning after
turning it ON or resetting it. The status of the Revert
Channel is also restored.
Revert Channel.)
•
The channel number is restored every time it is
changed. The current channel number is also restored
when changing the channel from the external terminal
by assigning the Channel Select function to the
Auxiliary Input port. "E2" appears on the Channel/
Status display when there is no configured channel.
(Refer to 20 Function Port.)
•
When the Scrambler is switched ON and the
configuration is restored, TKR-750/850/751/851
enables the Scrambler after turning it ON or it is reset.
However, the Scrambler Backup must be enabled in
order to restore the configuration of the Scrambler.
(Refer to 4.14.2 Scrambler Backup.)
•
When the Signalling No. of the Multi-table is switched
from Main to Sub, the selected Signalling No. is used
as the Signalling of the Sub-table after TKR-750/850/
751/851 is turned ON or it is reset.
table.)
•
When the transmission output power of each channel
is switched from High to Low, the state of the
transmission output power is restored after TKR-750/
850/751/851 is turned ON or it is reset.
TX High Power.)
Note: The backup data is cleared when a new data is written into
the TKR-750/850/751/851 by KPG-91D.
Version: 1.01 USA
(Refer to 16 Scan, 16.5
(Refer to 21 Multi-
(Refer to 4.10
Function Reference (FUNC)
63
Advertisement
Table of Contents
