Cw Speed (Cw Message); Cw Mod. Delay Time (Cw Message); Audio Frequency (Cw Message); Send Cw Message To Ra - Kenwood TKR-750-850 Function Reference

22.2.2 CW Speed (CW Message)

CW Speed is a speed in WPM to transmit a CW
Message.
! Configuration of KPG-91D
" Configuring the CW Speed (Refer to FPRG 6.12.2
CW Speed.)
22.2.3 CW Mod. Delay Time (CW
Message)
CW Mod. Delay Time is a duration between the time
when TKR-750/850/751/851 starts transmitting and the
time when it sends the CW Message.
! Configuration of KPG-91D
" Configuring the CW Mod. Delay Time (Refer to
FPRG 6.12.3 CW Mod. Delay Time.)

22.2.4 Audio Frequency (CW Message)

Audio Frequency is used to send a CW Message. You
can configure the frequency within the range between
400 Hz and 2000 Hz.
! Configuration of KPG-91D
" Configuring the Audio Frequency (Refer to FPRG
6.12.4 Audio Frequency.)

22.2.5 Send CW Message to RA

Send CW Message to RA monitors a CW Message sound
when sending the CW Message to RA line and the front
speaker. TKR-750/850/751/851 transmits the audio
signals with the CW Message while it is in the reception
mode.
Note: The CW Message is only sent from the RA line when the
channel is in Simplex mode. In this case, the CW Message
is not sent from the speaker.
! Configuration of KPG-91D
" Configuring the Send CW Message to RA (Refer to
FPRG 6.12.5 Send CW Message to RA.)
22.2.6 Encode with QT/DQT (CW
Message)
Encode with QT/DQT encodes the QT/DQT (Primary)
code configured to each channel while sending the CW
Message.
Version: 1.01 USA
Note: TKR-750/850/751/851 sends the QT/DQT code configured
to each channel when the Encode with QT/DQT function is
enabled, and it does not send the QT/DQT code when the
Encode with QT/DQT function is disabled. However, the
newly configured CW ID/CW Message is sent
corresponding to the Encode with QT/DQT configuration
when TKR-750/850/751/851 sends another CW Message or
CW ID while sending only the CW Message.
CW ID.)
! Configuration of KPG-91D
" Configuring the Encode with QT/DQT (Refer to
FPRG 6.12.6 Encode with QT/DQT (CW
Message).)
Function Reference (FUNC)
22 CW ID/CW MESSAGE
(Refer to 22.1
56