Table of Contents
Advertisement
Function
You can use a Priority Channel to transmit
while scanning.
When TKR-750/850 pauses scanning after
changing at the channel by pressing a PF
Priority + Talk
[Channel Up/Down] key, it uses the newly
Back
selected channel to transmit.
When TKR-750/850 pauses scanning to
receive a signal, it uses the currently
selected channel to transmit.
Note: You are able to configure a channel used for the repeat
operation as a Priority Channel.
Channel.)
Although TKR-750/850/751/851 performs the
repeat operation on the Priority Channel when receiving a
call on the Priority Channel, it transmits on a channel
matching the conditions configured in the Revert Channel
function when receiving the transmission request having
higher priority than the transmission with the repeater PTT.
! Configuration of KPG-91D
" Configuring the Revert Channel (Refer to FPRG
6.6.5 Revert Channel.)
16.6 Dropout Delay Time
The TKR-750/850/751/851 pauses scanning to receive
and resumes scanning after the signal drops. The
Dropout Delay Time is a period between the time when
TKR-750/850/751/851 finishes receiving the signal and it
resumes scanning.
Following are conditions to resume scanning:
•
There is no signal to receive.
•
The received QT/DQT code configured on the channel
does not match.
! Configuration of KPG-91D
" Configuring the Dropout Delay Time (Refer to
FPRG 6.6.6 Dropout Delay Time.)
Version: 1.01 USA
Description
(Refer to 16.2 Priority
Function Reference (FUNC)
16.7 Dwell Time
The TKR-750/850/751/851 pauses scanning if the PTT
switch is pressed to transmit during the scan and
resumes scanning after transmitting. The Dwell Time is a
duration between the time when TKR-750/850/751/851
ends transmissions and it resumes scanning.
! Configuration of KPG-91D
" Configuring the Dwell Time (Refer to FPRG 6.6.7
Dwell Time.)
16.8 Off-hook Scan
This function allows you to operate the Scan function
regardless of the local microphone position.
•
Off-hook Scan is enable.
TKR-750/850/751/851 performs the Scan operation
regardless of the local microphone's position.
•
Off-hook Scan is disabled.
TKR-750/850/751/851 performs scanning only when
the local microphone is on the On-hook position.
•
TKR-750/850/751/851 does not perform scanning
when the local microphone is leaving from hook.
•
TKR-750/850/751/851 pauses scanning and
switches to the Revert Channel when the
microphone's position changes from On-hook to
Off-hook. TKR-750/850/751/851 resumes
scanning when the microphone returns to the On-
hook position.
(Refer to 16.5 Revert Channel.)
Note: TKR-750/850/751/851 continues scanning without
pausing on the revert channel when receiving a
transmission command while the TX Disable function is
enabled. When the Off-hook Scan function is disabled,
TKR-750/850/751/851 moves to the revert channel.
(Refer to 20 Function Port.)
! Configuration of KPG-91D
" Configuring the Off-hook Scan (Refer to FPRG
6.6.8 Off-hook Scan.)
16 SCAN
36
Advertisement
Table of Contents
