Table of Contents
Advertisement
10 POWER CONTROL
! Configuration on the KPG-91D
" Configuring the Save Mode Duration (Refer to
FPRG 6.4.3 "Others" tab (Optional Features).)
10.4.4 Save On
This function activates when TKR-750/850/751/851/751/
851 enters Save Mode. You can assign three types of
function and they operate in the order of 1st, 2nd, then
3rd when TKR-750/850/751/851/751/851 enters Save
Mode.
(Refer to Table 10-1 Available functions.)
You can configure the Save On using the KPG-91D.
! Configuration on the KPG-91D
" Configuring the Save On (Refer to FPRG 6.4.3
"Others" tab (Optional Features).)
10.4.5 Save Off
This function activates when TKR-750/850/751/851/751/
851 exits Save Mode (when the status switches from Not
Busy to Busy or a PF key other than the [Save Mode On/
Off] key is pressed). You can configure three types of
function and they operate in the order of 1st, 2nd, then
3rd when TKR-750/850/751/851/751/851 exits Save
Mode.
(Refer to Table 10-1 Available functions.)
You can configure the Save OFF using the KPG-91D.
! Configuration on the KPG-91D
" Configuring the Save Off (Refer to FPRG 6.4.3
"Others" tab (Optional Features).)
Note: The key press tone (A/B) does not sound even if Save Mode
is switched On/Off with the PF [Save Mode On/Off] key
since no beep tones sound in Save Mode.
10.5 Start Up
This function activates when turning the TKR-750/850/
751/851/751/851 ON. You can assign three types of
function and they operate in the order of 1st, 2nd, then
3rd when TKR-750/850/751/851/751/851 is turned ON.
(Refer to Table 10-1 Available functions.)
You can configure the function operating when TKR-750/
850/751/851/751/851 is turned ON using the KPG-91D.
27
! Configuration on the KPG-91D
" Configuring the function operating when the
repeater is turned ON (Refer to FPRG 6.4.3
"Others" tab (Optional Features).)
10.6 Backup Power
This function operates when a power is switched from the
main power to the backup power. You can assign three
types of function and they operate in order of 1st, 2nd,
then 3rd when the power of TKR-750/850/751/851 is
switched to the backup power.
Available functions.)
! Configuration of KPG-91D
" Configuring the Backup Power Function (Refer to
FPRG 6.4.3 "Others" tab (Optional Features).)
10.7 Main Power
This function operates when the power is switched from
the backup power to the main power. You can assign
three types of function and they operate in order of 1st,
2nd, then 3rd when the power is switched to the main
power.
(Refer to Table 10-1 Available functions.)
! Configuration of KPG-91D
" Configuring the Main Power (Refer to FPRG 6.4.3
"Others" tab (Optional Features).)
Function Reference (FUNC)
(Refer to Table 10-1
Version: 1.01 USA
Advertisement
Table of Contents
