Hitachi Compute Blade 500 Series User Manual page 119

Menu items
Direct Cache Access
※2
(DCA)
Cores in CPU Package
※2
QPI Link Frequency
Note:
1 A value in double angle brackets, << >>, shows the default.
.
2 If you change a setting of this item, the EFI might not start. Do not change any
.
setting.
Recovery and RAS sub menu
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Place the cursor on a menu to set, and press Enter.
Table 2-85 Recovery and RAS sub menu items
Menu items
Advanced RAS
Backup Bank Management -
Disk GPT Recovery
System Recovery
Advanced RAS
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Select the item to display or set, and press Enter.
Hitachi Compute Blade 500 Series EFI User's Guide
1
Selection
• <<Enable>>
• Disable
• <<All>>
• 1-13
• Minimal Power
• Balanced
• <<Max Performance>>
Selection
- Sets the failure deconfiguration to CPU and
DIMM.
See Advanced RAS for details.
Sets the backup management.
- Set the disk GPT recovery
- Sets the system recovery.
UEFI setup menu
Description
Sets that the I/O device can
transfer data directly to CPU
cache.
Sets running cores in the CPU
package.
Sets the number of clock
frequencies in Quick Path
Interconnect (QPI) Link.
Description
2-99