Hitachi Compute Blade 500 Series User Manual page 70

Rollback Configuration
Secure Boot Configuration
Trusted Platform Module
(TPM 1.2)
Trusted Platform Module (TPM 1.2)
Place the cursor on an item to set, and press Enter.
Note: Do not change the settings of the following item. If you change the
settings in a poor attempt, UEFI may not start up.
• MOR State
The following table shows description of menu items displayed in the left side
of the window.
Select an item to display or set, and press Enter.
Menu items
TPM Status
TPM Physical
Presence
TPM Device State
MOR Status
Refresh TPM Status
TPM Settings
TPM Device
TPM State
MOR State
TPM Force Clear
Note:
2-50
Table 2-43 RAS Configuration menu items
Menu items Selection
-
-
-
Table 2-44 System Security sub menu items
Selection
-
-
-
-
• <<Disable>>
• Enable
• <<Deactivate>>
• Activate
• <<Disable>>
• Enable
-
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Sets the rollback option.
Sets the secure boot configuration.
Displays TPM option setting window.
See Trusted Platform Module (TPM 1.2) on
page 2-50 for details.
1
Description
Displays the status of TPM Physical
Presence.
Displays TPM Device State.
Displays MOR (memory overwrite request)
status. This item is displayed with EFI
firmware version 04-00 or later.
Refreshes the display of TPM status.
Enables or disables TPM Device.
Performs TPM Activation.
This item is only displayed when TPM
Device is Enable.
Enable or Disable MOR (memory overwrite
request). This item is displayed with EFI
firmware version 04-00 or later.
Deletes the TPM data.