Hitachi Compute Blade 500 Series User Manual page 62

Menu items
Network
Power
Processors
Recovery and RAS
Security
Storage
Devices and I/O Ports sub menu
Select an item to display or set, and press Enter.
Note: You need to change the PCI 64-Bit Resource Allocation setting, the MM
Config Base setting, and the USB Configuration setting when using some OSs
and applications. Do not change other items.
The following table shows description of menu items appeared in the left side
of the window. Select an item to display or set, and press Enter.
Menu items
Active Video
PCI Express Native
Control
PCI 64-Bit Resource
Allocation
MM Config Base
Intel® VT for Directed
I/O (VT-d)
2-42
Selects the Network setup options.
Selects the Power setup options.
Displays and provides option to change the processor settings.
See Processors sub menu on page
Displays the Recovery setting window.
See Recovery and RAS sub menu on page
Selects the TPM setup options.
See Security sub menu on page
Selects this option to see all the Storage Device options.
Table 2-37 Devices and I/O Ports menu items
Selection
• <<Onboard
Device>>
• Add-in Device
• Disable
• <<Enable>>
• Disable
• <<Enable>>
• <<2GB>>
• 1GB
• 2.5GB
• 3GB
• <<Enable>>
• Disable
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
2-46.
2-49.
1
Description
If Add-in Device is selected, video will be
switched from onboard video to an add-in
video adapter, and the onboard video will be
disabled before booting into OS.
If Onboard Device is selected, an add-in
video adapter can be used as the secondary
video.
Enable or disable the native control of PCI
Express features from OS.
Enable or disable the allocation of 64-bit
resources for PCI.
Select the Memory Mapped Config Space
base address.
[2.5GB] is displayed in the server blade
firmware version 08-24 or later.
Enable/Disable Intel@ Virtualization
Technology for Directed I/O (VT-d) by
reporting the I/O device assignment to VMM
through DMAR ACPI Tables.
2-48.