Menu items
POST Fail Retry
Notes:
1
A value in double angle brackets, << >>, shows the default.
.
2
These items are displayed but are not available.
.
Security sub menu
Place the cursor on a menu to set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Select a menu to set, and press Enter.
Table 2-107 Security sub menu items
Menu items
Secure Boot Configuration
Trusted Platform Module
(TPM 1.2)
Trusted Platform Module (TPM 1.2)
Place the cursor on an item to set, and press Enter.
Note: Do not change the settings of the following item. If you change the
settings in a poor attempt, UEFI may not start up.
•
MOR State
The following table shows description of menu items displayed in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-108 System Security sub menu items
Menu items
TPM Status
TPM Physical Presence -
TPM Device State
Hitachi Compute Blade 500 Series EFI User's Guide
1
Selection
•
Disable
•
<<Enable>>
Selection
-
Sets the secure boot configuration.
-
Displays TPM option setting window. See
Trusted Platform Module (TPM 1.2) on page
2-121
1
Selection
Displays the status of TPM Physical
Presence.
-
Displays TPM Device State.
UEFI setup menu
Description
Enable or Disable POST Fail Retry. POST
Retry is performed automatically when
EFI firmware detects any memory failure
at POST.
Description
for details.
Description
2-121