Hitachi Compute Blade 500 Series User Manual page 48

Menu items
Console Redirection
Settings
Note:
1 A value in double angle brackets, << >>, shows the default.
.
System Security sub menu
Select an item to display or set on Trusted Platform Module (TPM 1.2), and
press Enter.
Tip:
• Configure the following items when using TXT function.
– TPM Device: Enable
– TPM State: Activate
– TXT State: Enable
• When using TXT function on Vmware, execute the following command at
boot.
• #bootOption -o
The following table shows description of menu items appeared in the left side
of the window.
Select the item to display or set, and press Enter.
Menu items
TPM Status
TPM Physical Presence -
TPM Device State
TPM TXT Status
MOR Status
Refresh TPM Status
TPM Settings
TPM Device
TPM State
TXT State
2-28
Selection
-
Table 2-24 System Security sub menu items
Selection
-
-
-
-
• Disable
• <<Enable>>
• Deactivate
• <<Activate>>
• <<Disable>>
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
1
Sets console redirection and COM
port.
1
Description
Displays the status of TPM Physical Presence.
Displays TPM Device State.
Displays TPM Trusted Execution Technology
(TXT) Status.
Displays MOR (memory overwrite request)
status.
Refreshes the display of TPM status.
Enables or disables TPM Device.
Performs TPM Activation.
This item is only displayed when TPM Device
is Enable.
Enables or disables TXT.
Description