3
When the following is displayed, press Esc to close the Critical Message
.
window.
4
When the following is displayed, press Y to exit the setup utility.
.
5
press F1.
.
Check that "<Enter> Key pressed. Preparing to boot normally Pressed.
Entering Setup" or "<F1> Setup Pressed. Entering Setup" is displayed.
6
EFI setup menu starts up.
.
See
SAS 3004 iMR ROMB Configuration Utility
5-6
Starting the utility on page 5-7
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
to start the LSI MegaRAID HITACHI