[↑], [↓], [←], [→]
[Enter], [Space]
[+], [-]
[Esc]
Note: You can use only the keyboard to operate this utility.
Starting the utility
This section describes how to start LSI Software RAID Configuration Utility.
1
Start the remote console, and then power on the server blade.
.
Click Power > Power On in the tool bar of the remote console.
2
When <F1>Setup is shown during the server blade startup, press F1.
.
3
UEFI setup menu starts up and System Configuration and Boot
.
Management window appears.
6-4
Table 6-1 Key operation
Key
Moves the cursor.
Selects an item that the cursor is placed on.
Determines an item setting.
Changes values.
Changes a numeric value.
Exit the current menu.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
Operation