Hitachi Compute Blade 500 Series User Manual page 239

Note: If you select New Configuration, all data in the disks is lost.
Backup your required data before selecting New Configuration.
Tip:
• When you click Add Configuration, the existing drive groups and disk
arrays still remain. This should be selected when you add a disk array to
the existing disk group or build a disk array using additional hard disks.
• When you click New Configuration, you lose the existing drive group
and disk arrays. This should be selected when you discard the existing
drive group and disk arrays to build a new one.
• When you click New Configuration, the following window is displayed
first. Click Yes to build a new disk array.
3 Click Manual Configuration and click Next.
.
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
4-29