Tip: When adding iSCSI Target, select Add New iSCSI Target and
follow the step 2 and after.
8
Confirm that iSCSI Target Name and iSCSI Target IP Address is
.
displayed in the following setting menu. After that, press Enter.
9
Following setting menu is displayed by pressing Esc several times. After
.
that, select Save and press Enter.
10
Press Esc and following is displayed. Press Y to reboot a server blade.
.
Disconnecting iSCSI Target
Disconnecting boot device
Note: Connection or disconnection of iSCSI Target device can be also set by
One CommandManager.(For details, see the Hitachi Compute Blade 500
OneCommandManager Guide.)
9-14
iSCSI settings
Hitachi Compute Blade 500 Series EFI User's Guide